![]() |
7.29 €incl. VAT | plus Shipping Cost
|
The ground and ballast adhesive was developed by modeling professionals especially for bonding sand, ballast, grass flakes, scatter material, etc.. This adhesive is particularly thin and has a very low surface tension. Different bonding techniques are possible:
1. apply soil and gravel adhesive thinly to the ground surface with a brush and then spread the sand, litter material, etc. to be glued on thinly. Due to the low surface tension of the adhesive, the scattering material does not remain on the adhesive, but sinks into the adhesive and is particularly well bonded.
2. soil and ballast adhesive with the supplied pipette between plants (eg, the bush corn plants or wheat ears) drip and then sprinkle appropriate sand on the ground.
3. the perfect track ballast: sprinkle the ballast, pebbles, etc. around the track sleepers, pile them up with a brush or tweezers, and then drizzle the soil and ballast glue between the stones with the pipette. The glue will flow between the small stones and bond them firmly together.
The soil and gravel adhesive dries transparent and can be further diluted with water. Delivery includes a practical pipette.
Modellbahnshop - Division of KORN e.K. KORN e.K. Inhaber: Denis Korn Thomas-Müntzer-Straße 4 04758 Oschatz Deutschland USt-ID-Nr.: DE 165 839 418 eingetragen im Handelsregister des Amtsgerichtes Leipzig Handelsregisternummer HRA 16661 WEEE-Reg.-Nr. DE 12745699 |
Business hours
|