Creality Space Pi V2 Filament Dryer

Creality Space Pi V2 Filament Dryer Product Details

Description

Is damp filament affecting your print quality? The Creality Space Pi V2 ensures optimal material conditions

Want to minimize bubbling, uneven extrusion, or inconsistent surface quality caused by damp filament? The Creality Space Pi V2 Filament Dryer helps you prepare your printing material specifically for your next 3D print. With a heating temperature of up to 75 °C, uniform 360° hot air circulation, and convenient material presets, the standard dryer is suitable for numerous common filament types.

Especially convenient: The filament can not only be dried before printing but can also be fed directly from the dryer during the printing process. This keeps the material protected and ensures a continuous supply to the 3D printer.

Creality Space Pi V2 – uniform filament drying with 360° hot air circulation

As uniform a heat distribution as possible is crucial for reliable filament drying. The Space Pi V2 therefore uses 360° hot air circulation to distribute the heated air throughout the interior. This ensures that the loaded filament spool is heated evenly on all sides.

With temperatures of up to 75 °C, the filament dryer covers a wide range of different materials—from classic PLA to more technically demanding filaments such as PC, PA, or carbon-fiber-reinforced variants.

Smart Presets for Different Filament Types

To save you from having to search for suitable settings for each material, the Creality Space Pi V2 offers convenient Smart Presets. The pre-set programs allow you to quickly select the appropriate drying temperature for numerous filament types.

Convenient control via the touchscreen

Operation is handled directly via the intuitive touchscreen. Temperature and settings can be easily controlled and adjusted to the material being used. This makes the Space Pi V2 suitable for both experienced 3D printing users and beginners who want to improve their filament storage and material preparation.

In addition, a 2nd-generation smart sensor monitors relevant operating parameters, thereby supporting a controlled drying process.

Technical Specifications of the Creality Space Pi V2 Filament Dryer

Dry filament and use it directly during 3D printing

The Creality Space Pi V2 is not only suitable for preparing a spool of filament. Via the integrated filament outlet, the material can be fed directly to the 3D printer. This allows the filament to be stored in the protected interior of the dryer during the printing process.

The dryer accommodates a filament spool weighing up to 1 kg. It supports spools with a maximum diameter of 190 mm and a width of up to 68 mm. Filaments with diameters of both 1.75 mm and 2.85 mm can be used.

Why is a filament dryer worth it?

Many types of filament can absorb moisture from the environment. During printing, this can result in issues such as uneven material flow or a compromised print surface. Controlled drying helps prepare the material for printing under conditions that are as consistent as possible.

The Creality Space Pi V2 is therefore a useful addition for hobbyists, ambitious makers, and professional users who regularly work with different filament types and value reproducible printing conditions.

Creality Space Pi V2 Filament Dryer for Your 3D Printing Setup

From PLA and PETG to ABS, ASA, PC, and PA: With its material presets, a heating temperature of up to 75 °C, and 360° hot air circulation, the Space Pi V2 offers a convenient solution for filament preparation. The touchscreen display and direct filament feed make the dryer a practical companion for your daily 3D printing needs.

Improve your filament preparation and get the Creality Space Pi V2 as a practical addition to your 3D printing setup!

Features:

• Filament dryer for one filament spool weighing up to 1 kg
• Heating temperature up to a maximum of 75 °C
• 360° hot air circulation for even heat distribution
• Smart presets for various filament types
• PLA preset at 50 °C
• TPU, PETG, and PETG-CF presets at 60 °C
• PP, ABS, PET, PC, ASA, PA, and PA-CF presets at 75 °C
• Convenient operation via touchscreen display
• 2nd-generation Smart Sensor
• Clear display of temperature and settings
• Helps reduce moisture-related printing issues
• Suitable for filament preparation before and during the printing process
• 1 filament output for direct feeding to the 3D printer
• For spools with a maximum diameter of 190 mm
• For spools with a maximum width of 68 mm
• Suitable for filament diameters of 1.75 mm and 2.85 mm