ESU 58923 LokSound 5 Nano DCC

ESU 58923 LokSound 5 Nano DCC Product Details

Description

ESU presents with the "LokSound 5 Nano DCC" a again clearly smaller LokSound decoder: With only 19.6 mm x 8.5 mm x 3.2 mm it is the smallest LokSound decoder, which was ever built by ESU. Because of this, it should really find its use in all vehicles of the nominal sizes N and TT. The LokSound 5 Nano DCC decoder is a pure DCC decoder with open cable ends for free wiring and comes with a 11 x 15 mm "sugar cube" speaker along with sound capsule kit

Operating modes:

The LokSound 5 Nano is a "thoroughbred" DCC decoder, with 14 to 128 speed steps as a matter of course as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail-ComPlus®, the decoder logs on to a suitable digital command station fully automatically. It handles all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable command stations. For command stations that can only program CVs from 1-255 there are auxiliary registers. The LokSound 5 Nano DCC decoder recognizes Märklin® braking tracks as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC shuttle train automatic allows automatic shuttling between two stations. The LokSound 5 Nano DCC can be used on analog DC railroads.

The decoder switches between operating modes fully automatically "on-the-fly". For the most part, nothing needs to be set. The LokSound 5 Nano DCC decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and offers HiFi quality on your layout. Practically no difference to the original is audible. A Class-D audio amplifier with up to 3W output power drives the speakers, which may have between 4 Ohm and 32 Ohm impedance. A 128 Mbit sound memory provides enough capacity. All individual sounds can be individually adjusted in volume. The super-flexible sound engine without a rigid schedule allows prototypically accurate simulation of all conceivable rail vehicles.

Function:

Despite its small size, the LokSound 5 Nano DCC has 6 amplified function outputs as well as a logic level output as a solder pad. All important light functions are available. The brightness of each output can be adjusted separately. The decoder masters automatic pressing on and off during uncoupling for ROCO®, Krois® and Märklin Telex® couplers.Motor control. The motor control of the LokSound 5 Nano DCC features a variably adjustable PWM clock frequency from 10kHz to 50kHz, which ensures super quiet operation, especially with bell armature motors - The typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows automatic tuning of the decoder to the motor. The LokSound 5 Nano DCC decoder delivers up to 0.75A motor current.

Features:

• LokSound 5 Nano DCC - empty decoder
• single strands
• with 11 x 15mm loudspeaker
• Gauge: N,TT