ESU 59629 LokPilot 5.0, DCC, 21MTC-Schnittstelle

ESU 59629 LokPilot 5.0, DCC, 21MTC-Schnittstelle Product Details

Description

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all features, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC layouts. This sacrifice of flexibility, however, is rewarded with a lower price. Depending on the interface version, each LokPilot 5 DCC decoder offers at least 10 amplified function outputs with 250mA output current each. The version with 21MTC interface adds 4 outputs for controlling servos or logic level outputs. All important light functions are available. The brightness of each output can be adjusted separately. The decoder handles automatic pressing on and off during uncoupling for ROCO®, Krois® and Telex® couplers.

Features:

• ESU - LokPilot 5 DCC
• Gauge size: H0, 0
• NMRA/DCC with 14, 28, and 128 speed steps, DCC RailCom®
• DCC 2-digit and 4-digit addresses (short and long addresses)
• Analog DC voltage (can be switched off)
• Automatic detection of operating mode and DCC speed step setting
• Support of Lenz® LG100, Märklin®, Roco® brake sections and ZIMO® HLU commands
• Support for ABC brake mode and ABC shuttle train route
• Wrong drive bit / storage of operating states
• Shunting mode and acceleration and braking delay switchable via button
• 2.0 A continuous load capacity
• Connection of DC bell armature and AC motors (with permanent magnet)
• Noiseless, motor-friendly control with up to 50 kHz clock frequency
• Motor output protected against overload. 5th generation load control (can be switched off)
• 10 amplified function outputs
• 2 logic level outputs plus 2 additional logic level outputs instead of SUSI
• 250mA load capacity per amplified output
• Total current of all function outputs approx. 500mA. Outputs short-circuit proof
• Assignment of the function outputs freely selectable (function mapping)
• Dimensions: 21,4mm x 15,5mm x 4,5mm