Lenz 10433-01 Lokempfänger Gold 1,0/1,8A m Stecker 652

Lenz 10433-01 Lokempfänger Gold 1,0/1,8A m Stecker 652 Product Details

Description

In conjunction with the optional energy storage unit, the intelligent USP circuit ensures that the locomotive can also overcome dirty track sections or currentless frogs. The memory module is installed separately in the locomotive.

Gold decoders are equipped with the RailCom function. In addition to the locomotive address, other data (e.g. current speed, CV content) can be sent back from the locomotive via the track and displayed.

A particularly simple signal stop can be realized by using the ABC brake modules. In conjunction with the constant braking distance, stopping precisely in front of red signals is no problem. It is of course possible to pass in the opposite direction.

The "slow speed" signal pattern can be implemented without any problems, whereby the speed to be run can be set via CV in the decoder. All functions can be operated during the signal stop or slow speed, and it is also possible to reverse away from the red signal.

With ABC modules BM3, a block section of any length can be set up very easily.

Features:

• RailCom-capable, RailCom function already set at the factory
• ABC technology from Lenz
• USP - uninterrupted communication between control center and decoder
• S.U.S.I. interface (except mini)
• High-frequency control of the motor speed
• Motor current continuous/peak: 1/1.8 A (GOLD+ mini 0.5/0.8 A)
• Five function outputs can each be loaded with 500 mA
• Total load capacity of all F outputs: 500 mA
• GOLD+ mini: two function outputs, each with a load capacity of 300 mA
• Total load capacity of all F outputs: 300 mA
• GOLD maxi +: eight F outputs, each with a total load capacity of 1,000 mA
• All GOLD: function outputs can be switched time-controlled (e.g. for remote-controlled clutches)
• Outputs naturally short-circuit protected
• operate with 2- and 4-digit addresses
• naturally also in multiple traction
• Automatic detection of digital/analog operation
• Shunting gear