Product information at 15/06/2025, 23:49
|
210.00 €incl. VAT | incl. Shipping Cost
|
Keep your H0 model layout in good shape with the Lux rail and catenary grinding trolley. Stubborn oil and dirt residues, deposits caused by traction tire abrasion and oxide layers on rails, center conductor and contact wire can be removed more easily with the help of the cleaning trolley.
By installing the innovative and reliable cleaning technology in a rail vehicle, even particularly inaccessible areas of your model layout such as tunnel sections, staging yards and catenary wire-covered track systems can be cleaned without any problems. The maintenance-free operating times of your rail vehicles are significantly increased and safe current collection from the rail, center conductor and contact wire is achieved.
The cleaning trolley is supplied with power via the contact voltage and can be pulled or pushed by standard traction units. It has no drive for locomotion.
The innovative SSF-09 control electronics work on the basis of movement. When the trolley is moved on the powered track, the cleaning technology switches on automatically.
The battery station carried in the grinding carriage and charged via the track voltage buffers the motor of the cleaning technology in the event of a power interruption on the rail (e.g. due to dirt). This means that the rail grinding carriage retains its cleaning effect even on short, de-energized sections of track.
The Lux rail and overhead line grinding trolley is equipped with a polishing wheel as standard. The trolley can optionally be equipped with other cleaning attachments (item no. 9030, 9032, 9033, 9034 and 9036).
|
Modellbahnshop - Division of KORN e.K. KORN e.K. Inhaber: Denis Korn Thomas-Müntzer-Straße 4 04758 Oschatz Deutschland USt-ID-Nr.: DE 165 839 418 eingetragen im Handelsregister des Amtsgerichtes Leipzig Handelsregisternummer HRA 16661 WEEE-Reg.-Nr. DE 12745699 |
Business hours
|
