Viessmann 8602 H0 CarMotion MAGIRUS DEUTZ 3-axle corner-hood truck with motorized tilt function

Viessmann 8602 H0 CarMotion MAGIRUS DEUTZ 3-axle corner-hood truck with motorized tilt function Product Details

Description

Viessmann 8602 H0 CarMotion MAGIRUS DEUTZ 3-Axle Corner-Hood Truck with Motorized Tilt Function

Are you looking for a realistic H0 working model that actively brings construction sites, transport routes, and street scenes to life? The Viessmann 8602 CarMotion MAGIRUS DEUTZ 3-axle corner-hood truck impresses with its motorized tipping function and many typical CarMotion features for particularly dynamic layout operation.

The tipper body is powered by a powerful motor and unloads cargo through the tailgate. The vehicle can move forward during unloading, ensuring that the cargo is distributed realistically even while tipping.

CarMotion model with realistic tipping function

The opening angle of the tailgate can be limited by stops. This allows fine and coarse cargo to be unloaded at the appropriate speed. Cargo weighing up to 20 grams is tipped out without any problems.

Tipping—with or without the truck moving forward—can be activated via the remote control and additional infrared commands. This creates realistic scenarios on construction sites, at bulk material yards, or in industrial and depot settings.

Extensive CarMotion Features

Like all models in the CarMotion series, this vehicle features modern Li-Po battery technology, realistic braking and acceleration, infrared control, and numerous lighting functions.

Get the Viessmann 8602 H0 CarMotion MAGIRUS DEUTZ 3-Axle Corner-Dump Truck and expand your layout with a powerful functional model featuring a motorized tipping function and impressive vehicle technology.

Features:

• Gauge: H0
• CarMotion functional model
• MAGIRUS DEUTZ 3-axle corner-hood truck
• Motorized tilt function
• Tilting container with powerful drive
• Unloading via the container’s tailgate
• Gate opening angle can be limited by stops
• Suitable for fine and coarse cargo
• Vehicle can move forward during unloading
• Realistic distribution of cargo during tipping possible
• Cargo up to 20 g can be unloaded without difficulty
• Tipping can be controlled via remote control and infrared commands, with or without the vehicle moving forward
• Charging and programming port
• Short charging times thanks to modern Li-Po batteries
• Runtime during normal operation: approx. 4 to 6 hours
• Runtime at maximum speed: approx. 2 hours
• Easy on/off switching via reed switch under the roof
• Can be operated with a magnetic pin or telescoping magnetic rod (Item No. 8410)
• Infrared transmitter and infrared receiver for remote control
• Realistic braking and acceleration
• Configurable speed via speed-controlled motor
• Unobstructed loading area thanks to underfloor drive
• Cab lighting
• Brake lights and reverse lights
• Right and left turn signals controllable
• Hazard lights controllable
• Low beam and high beam
• Roof turn signals depending on vehicle type
• Visible driver’s cab with figure
• 5-pin plug-in coupler for CarMotion trailers or semi-trailers
• Compatible with contact wire or magnetic tape
• Controlled via infrared signals, permanent magnets, electromagnetic stop coils, and remote control, item no. 8402
• Short, straight reverse movement without lane-guidance aids possible via remote control
• Prototype: MAGIRUS DEUTZ 230 D 26 AK
• 3-axle prototype vehicle
• Prototype power: 230 PS
• Displacement: 12.6 l
• V8 direct-injection engine
• STETTER AM 9 mixer trailer
• Nominal capacity: 9 m³
• Compatible sound retrofit set: Item 8452
• Dimensions (L x W x H): 8.7 x 3.2 x 3.3–6.4 cm