NEW Anycubic PLA High-Speed Filament, Red, 1 kg

Anycubic PLA High-Speed Filament 1 kg Spool - Bright Red

Are you looking for a PLA filament that supports high print speeds while delivering precise results with smooth surfaces? The Anycubic PLA High-Speed Filament 1 kg Spool - Bright Red is designed for demanding 3D printing projects and supports speeds of up to 600 mm/s.

The filament’s high flowability promotes a consistent material flow during the printing process. This allows for short print times without compromising clean, precise shapes. At the same time, high toughness and low shrinkage ensure stable printed models and dimensionally accurate results.

High Speed PLA for fast 3D printing projects

With a recommended print speed of 50 to 600 mm/s, this filament offers a wide range of applications for fast manufacturing processes. The printing temperature ranges from 190 to 260 °C, and the heated bed temperature from 55 to 65 °C. This provides clear parameters for properly configuring the printing process.

The color red, or bright red, is suitable for printed objects where a bold and eye-catching color effect is desired. Whether for models, prototypes, decorative objects, or functional components, this filament delivers precise results with smooth surfaces.

Consistent material flow and precise shaping

Rapid cooling promotes clean shaping and precise print results. Combined with high flowability, this enables consistent material transport during the printing process. This can be particularly helpful at higher print speeds.

Low shrinkage promotes dimensional accuracy. This allows fine surface structures to be reproduced more cleanly. The high toughness also contributes to durable and stable 3D-printed models.

Smart filament detection with compatible devices

When used with compatible devices, smart filament detection enables the automatic capture of print information. This makes handling the filament in the appropriate system more convenient.

Additionally, ACE compatibility, a reusable filament spool, and smart identification are specified. The drying conditions are also clearly defined: 45 to 50 °C for 6 to 8 hours.

For fast, precise, and vibrantly colored prints

The Anycubic PLA High Speed Filament 1 kg Spool – Bright Red combines high print speed, good flowability, low shrinkage, and smart filament detection. Get this filament for 3D printing projects that require short production times, clean surfaces, and a vibrant red color.

Features:

• Supports print speeds of up to 600 mm/s for shorter production times
• High flowability ensures consistent material feed during the printing process
• Rapid cooling supports clean shaping and precise print results
• High toughness helps create durable and stable 3D-printed models
• Low shrinkage promotes dimensional accuracy and fine surface textures
• Smart filament detection automates the collection of print information on compatible devices

Technical Specifications:

• Filament type: PLA High Speed
• Color: Red
• Printing temperature: 190 to 260 °C
• Heated bed temperature: 55 to 65 °C
• Recommended nozzle size: 0.2 mm or larger
• Recommended print speed: 50 to 600 mm/s
• Maximum volumetric flow rate: 18 mm³/s
• Density: 1.19 g/cm³
• Melting temperature: 157 °C
• Heat deflection temperature (0.45 MPa): 52 °C
• Young’s modulus: 2750 ± 260 MPa
• Tensile strength: 45 ± 5 MPa
• Elongation at break: 9 ± 1 %
• Flexural modulus: 3905 ± 300 MPa
• Flexural strength: 82 ± 8 MPa
• Izod impact strength (X-Y): 21 ± 1 kJ/m²
• Tensile strength (Z): 22.1 ± 0.6 MPa
• Drying conditions: 45 to 50 °C for 6 to 8 hours
• ACE compatibility: supported
• Reusable filament spool: supported
• Smart identification: supported

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.