ESU 59315 LokPilot 5 L DCC/MM/SX/M4, Stiftleiste with Adapter (Spurgröße 0, G, I)

The LokPilot 5 L finds its place wherever the LokPilot 5 no longer "fits" in terms of performance. These are ideally vehicles of nominal size 0, but also gauge 1 vehicles that are to be equipped without sound. The LokPilot 5 L is mechanically compatible with the LokSound 5 L decoder and features the same connector pins. All further details can be found under the corresponding items.

Features:

• Manufacturer: ESU
• suitable for 0, 1 and G scale vehicles
• pin header with adapter
• multi-protocol decoder
• can be used on analog DC and AC pickups (maximum speed can be set separately)
• PowerPack installed directly on the decoder helps to bridge dirty track sections
• all function outputs as well as the motor output are protected against overloading

operating modes:

• DCC, Motorola®, Selectrix® and M4
• 14 to 128 speed steps in DCC format
• 2- to 4-digit addresses in DCC format
• up to 32 functions in DCC format
• with RailComPlus®, the decoders register fully automatically with a suitable digital command station and the CV values on the main track can be read out with suitable command stations
• mastery of all DCC programming modes
• Auxiliary registers exist for command stations that can only program CVs from 1-255
• Motorola® users benefit from up to 28 speed steps at 255 addresses
• 3 additional Motorola® addresses allow the triggering of 16 functions
• a built-in programming mode makes reprogramming possible even with the venerable Control Unit 6021
• M4 protocol allows automatic login to mfx® compatible command stations
• all 32 possible function keys are offered
• recognition of Märklin® brake sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system
• braking with DCC brake modules or with DC voltage is possible
• stops even with a Selectrix® brake diode
• ABC shuttle train automatic allows automatic shuttling between two stations
• fully automatic switching between operating modes "on-the-fly" (usually nothing needs to be set)

Functions:

• 11 amplified function outputs with 500mA load capacity each
• 6 additional logic level outputs are available
• on request also (2 pieces) RC servos or SUSI expansion modules can be controlled
• all important light functions are available
• brightness of each output can be adjusted seperately
• control of automatic engagement and disengagement during uncoupling for ROCO®, Krois® and Telex® couplers
• 2 sensor inputs can trigger functions on demand

motor control:

• variably adjustable PWM clock frequency from 10kHz to 50kHz provides super quiet operation especially for bell armature motors (the typical "hum" is a thing of the past)
• load control now adaptable to difficult cases with up to 10 CVs
• unique "Autotune" function allows automatic tuning of the decoder to the motor
• with up to 3.0A motor current there is enough "juice" even for older motors

Specs:

• Gauge: G
• Type: 1

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.