Modellbahnshop Model Train Shop Mount for ESU LokSound 5 L Decoder

ESU Loksound 5 L Mount

Introduction

Are you looking for a secure, neat, and precise solution to reliably install your ESU LokSound 5 L decoder in a model railroad locomotive? Proper installation of the decoder is crucial, especially when digitizing, converting, or optimizing Gauge 0, Gauge 1, or garden railway models. The decoder should not sit loosely inside the model, should not shift, and should not come into direct contact with conductive components. The ESU Loksound 5 L Mount offers a practical and well-designed solution specifically for this purpose.

With the ESU Loksound 5 L Mount, you get a precisely fitting 3D-printed mount designed specifically for the ESU LokSound 5 L decoder. It ensures a secure, low-vibration, and isolated installation of the decoder while also facilitating a tidy installation inside the locomotive. Protected installation is particularly important for high-quality sound decoders, as the electronics should be reliably shielded from unnecessary stress and potential short-circuit risks.

Are you looking for more organization, greater security, and flexible positioning when installing your decoder in your model? Then this mount is the perfect addition to your digitization project. The decoder is securely fastened to the mount with screws, preventing it from shifting during operation. At the same time, the mount can be attached to a suitable location inside the locomotive using double-sided 3M adhesive tape. This gives you flexibility during installation and allows you to optimally adjust the position to fit the available space, cable routing, and other components in the model.

Manufacturer

The ESU Loksound 5 L Mount is manufactured using a precise 3D printing process from sturdy plastic. This manufacturing method is particularly well-suited for functional model railroad components, as it enables a dimensionally accurate and practical design. Especially with a decoder mount, it is crucial that the dimensions are correct, the decoder is securely held in place, and installation in the model can be carried out easily and reliably.

The plastic used offers an important advantage for the installation of electronic components: it acts as an insulator. As a result, the decoder does not rest directly on a metal frame, a weight, a mounting plate, or any other conductive component of the locomotive. This separation is particularly important because it reduces the risk of short circuits and provides additional protection for the decoder. The ESU Loksound 5 L Mount thus supports a professional and safe installation, as required for demanding model railroad projects.

The design is tailored to the needs of model railroaders who want to digitize, modify, or technically upgrade their locomotives themselves. Installing a sound decoder is not just a matter of attaching the decoder somewhere. Rather, the entire installation should be well-organized, easy to maintain, and reliably durable. This is precisely where the ESU Loksound 5 L Mount stands out thanks to its sturdy construction, precise fit, and the ability to route cables neatly and in a space-saving manner.

Technical Details

The ESU Loksound 5 L Mount is designed to fit the ESU LokSound 5 L decoder. The LokSound 5 L measures 50.8 × 25.4 mm. The mount is based on these dimensions and is designed to have nearly the same dimensions as the decoder itself. As a result, it requires virtually no additional space inside the model. This is particularly advantageous when the interior of the locomotive already houses speakers, weights, cables, lighting elements, or other electronic components.

A key feature of the mount is that the decoder is secured with screws. The ESU LokSound 5 L decoder is not simply inserted loosely or secured only temporarily, but is mechanically and securely fastened to the mount. The four screws included in the package are used to secure the decoder to the mount. This ensures a secure fit that remains stable even in the face of vibrations, movements, and jolts during operation. Especially with Scale 0, Scale 1, and garden railway models, the size and weight of the vehicles can cause noticeable stress during operation.

The low-vibration installation is another advantage of the ESU Loksound 5 L Mount. If a decoder slips or moves inside the model, cables can be strained, solder joints can be stressed, or contacts can be damaged. A secure and fixed position for the decoder therefore not only helps keep the model organized but also ensures long-term operational reliability. The decoder stays exactly where it was mounted, and cable routing can be planned neatly.

Insulated installation is particularly important. Thanks to the plastic mount, the decoder has no direct contact with the locomotive’s conductive components. This significantly reduces the risk of short circuits. Many model railroad locomotives contain metal frames, ballast weights, or other conductive components inside the body. If a decoder is installed without proper insulation, dangerous contact can occur if the decoder is in an unfavorable position or moves. The ESU Loksound 5 L Mount creates a protective distance between the electronics and the locomotive’s structure.

The solder points located beneath the decoder also remain usable. This is a practical advantage when connecting and routing cables. Wires for the motor, track connection, speakers, lighting, or additional functions can be routed neatly and in a space-saving manner. Neat cable routing not only simplifies installation but also facilitates future maintenance. If you later wish to make changes or inspect the decoder, you’ll benefit from a well-organized layout inside the locomotive.

The mount is attached to any suitable location inside the locomotive using 3M double-sided adhesive tape. This means there is no fixed installation position. You can place the ESU Loksound 5 L Mount wherever there is sufficient space and the cable routing makes sense. Depending on the model, this could be next to the speaker, on a flat surface inside the housing, on a mounting plate, or at another suitable location. The 3M adhesive tape is not included in the package, so you can select the appropriate fastener based on your specific installation plan.

The mount is manufactured using a precise 3D printing process. This results in a sturdy plastic part with high dimensional accuracy. As is typical for 3D-printed components, slight surface textures may be visible. These are inherent to the manufacturing process and do not affect functionality or fit. What matters is the bracket’s technical purpose: it is designed to securely hold the decoder, provide electrical insulation, and enable a clean installation. The ESU Loksound 5 L bracket reliably meets these requirements.

The package includes a 3D-printed decoder mount and four screws for attaching the decoder to the mount. The decoder itself and the 3M double-sided adhesive tape are not included. This provides you with the mechanical foundation for the secure installation of your ESU LokSound 5 L decoder and allows you to customize the final mounting in the model to fit your locomotive.

Purchase Recommendation

The ESU LokSound 5 L Mount is a highly recommended solution for anyone who wants to install their ESU LokSound 5 L decoder securely, neatly, and in a space-saving manner in a model railroad locomotive. A sound decoder is a valuable and important component within the digital locomotive control system. Therefore, it should not be housed in the model without protection or left loose. With this mount, you can create a secure, insulated, and well-organized installation.

A well-designed decoder mounting system is particularly advantageous when converting models to digital. Many locomotives do not come from the factory with a suitable mounting for modern sound decoders. Often, model railroaders must decide for themselves where to place the decoder and how to secure it. The ESU Loksound 5 L Mount makes this task significantly easier, as it securely holds the decoder while allowing for flexible installation within the model.

The mount can also be a useful upgrade for vehicles that have already been digitized. If a decoder was previously secured only with tape, heat-shrink tubing, or a makeshift solution, the ESU Loksound 5 L Mount allows for a much neater and more stable installation. The decoder sits securely, remains accessible, and is better protected against direct contact with conductive parts. This ensures greater safety and a more professional overall appearance inside the locomotive.

Another reason to purchase it is its space-saving design. Since the mount has nearly the same dimensions as the decoder itself, it doesn’t take up any unnecessary space. Especially when modifying a locomotive with additional speakers, function outputs, lighting, or other electronic components, every millimeter inside the locomotive is valuable. The mount supports compact installation and helps make optimal use of the available space.

If you value a durable, safe, and easy-to-install solution, the ESU Loksound 5 L Mount is an excellent choice. It combines sturdy 3D-printed quality, insulating material properties, secure screw fastening, and flexible mounting options. This makes it ideal for G gauge, 1 gauge, and garden railway projects, as well as for any custom modifications where an ESU LokSound 5 L decoder needs to be neatly integrated.

The ESU Loksound 5 L Mount is thus a small but effective accessory for professional decoder installation. It protects the electronics, improves organization within the model, and facilitates neat cable routing. Anyone who wants to not only digitize their locomotive but also build it with technical precision and reliability will find this mount to be an excellent choice.

Features:

• Precisely fitting 3D-printed mount for ESU LokSound 5 L decoders
• Suitable for installation in model railroad locomotives
• Ideal for G gauge, N gauge, and garden railway models
• Practical for conversions, digitization, and custom model railroad projects
• Secure and low-vibration mounting of the decoder
• Insulated mounting reduces the risk of short circuits
• No direct contact between the decoder and conductive components
• Secure fit of the decoder thanks to screw fastening
• No slipping during operation
• Solder points located beneath the decoder remain usable
• Allows for neat and space-saving cable routing
• Flexible mounting at a suitable location inside the locomotive
• The bracket can be mounted using 3M double-sided adhesive tape
• The bracket has nearly the same dimensions as the decoder itself
• Requires no additional space in the model
• Made of sturdy plastic
• Precise 3D printing process with high dimensional accuracy
• Easy installation and practical handling
• Compatible with ESU LokSound 5 L
• LokSound 5 L decoder dimensions: 50.8 × 25.4 mm
• Package contents: 1x 3D-printed decoder mount
• Includes: 4 screws for attaching the decoder to the mount
• Decoder not included
• 3M adhesive tape not included
• Due to the 3D printing process, slight surface textures may be visible
• Visible surface textures do not affect function or fit

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.