Piko 56597 PSD XP 5.1 Sound PluX22 with loudspeaker (für BR 216 DB Serie)

The Piko 56597 PSD XP 5.1 Sound PluX22 with speaker is a compact, very powerful multiprotocol sound decoder of the latest generation with 12 bit sounds and high sample-frequency, 8 sound channels, an output power of 2.5 watts and a significantly increased memory depth.

The sound decoder provides a noise-free sound experience at the highest level. It complies with the current RCN standards in all areas and can be used in DCC, mfx® and Motorola® digital systems. Furthermore, it also works in analog mode with DC or AC voltage. The sound decoder is RailCom® as well as RailCom Plus® capable. The innovative PIKO SmartDecoder XP 5.1 Sound with many braking section functions independently recognizes the respective operating mode and has a wide range of setting options for the additional functions.

A fundamentally newly developed auto-adaptive motor control ensures silky smooth operation and is thus suitable not only for DC motors, but also for bell armature motors up to a continuous current consumption of 1.2 A. Short-term higher motor currents up to 2 A are well tolerated. The sound decoder masters ABC braking, ABC shuttle automatic as well as ABC slow speed. The setting of the motor characteristic is done via the minimum, average and maximum speed (simple characteristic), or via the extended characteristic with individual settings for 28 speed steps.

Furthermore, it has two direction-dependent lighting outputs, as well as seven additional special function outputs, which can be switched via function keys up to F68 (DCC). The shunting gear with extended slow speed range, the three possible starting and braking delays, as well as the many vehicle sounds can also be switched via function keys. The sound part can control fixed function outputs as well as the motor output of the decoder. For example, the lighting of a diesel locomotive flickers when the engine is started. Due to the advanced powermanagement, the PIKO SmartDecoder XP 5.1 is supported in case of short-term power loss.

Features:

• Suitable for DC and bell armature motors up to 1.2 A
• 14, 28 or 128 speed steps, depending on data format
• Short (1-127) and long (128-9999) addresses
• Extended speed step characteristic adjustable
• Shunting speed (half speed) switchable
• 3 adjustable starting, braking delays, each switchable via F0 - F68
• Direction-dependent light outputs, dimmable
• 7 special function outputs, dimmable, direction of travel-dependent adjustable
• Activation of programmable function keys up to F12 for analog operation
• Second dimming for lighting and A1 to A7 adjustable, switchable
• Simple function mapping, F0 - F12 for lighting and A1 to A7
• Extended function mapping, F0 - F68 for switching multiple outputs
• Lighting on train side can be switched off
• Speed-dependent switching off of function outputs
• Four adjustable flash generators for the function outputs
• Load or speed dependent smoke generator control
• Firebox flickering
• Function outputs A4 and A5 for digital couplers and shunting tango
• Fade-in, fade-out of light and function outputs, adjustable
• Energy saving lamp effect: reaching maximum brightness after adjustable time
• Fluorescent lamp switch-on effect with adjustable flash time
• Many preset lighting effects (e.g. North American lighting scenes)
• Braking with DCC brake signal, braking sections with DC voltage or ABC brakes
• ABC slow speed section with LENZ BM2
• ABC automatic shuttle with adjustable stopping time and slow speed
• Adjustable braking distance in cm, activatable via ABC, DC, DCC brake signal, as well as via speed level 0 or programmable function key
• Special controller configuration for precise motor control of difficult motor types
• Motorola with 4 addresses for functions F1 - F16 when used with Motorola command stations
• All outputs protected against short circuit
• Fault memory for motor and function outputs, as well as temperature shutdown
• Conventional DC and AC operation with automatic switching to the respective operating mode
• All CVs can be programmed with digital devices of the formats DCC and Motorola
• In DCC mode programmable by register, CV direct or page programming
• Main track programming (DCC)
• Decoder programming lock

Specs:

• Gauge: H0
• Type: 1

Instruction manual / Safety instructions:

• Manual (1.01 MB)

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.