Roco 10835 Z21 multiMAUS

Low-cost control unit with many possibilities. Several Z21 multiMAUS devices can be operated simultaneously on the system. The display is adjustable in its brightness and compatibleto the old Lokmaus 2 system. In conjunction with 10764, that Z21 multiMAUS which is plugged into the master input becomes the command station.

Up to 9,999 locomotive addresses can be controlled by direct input; 64 of them can be stored in a database and given names: e.g. 103RB (103 red-beige). Up to 29 functions (incl. headlights) can be activated per locomotive, if the machine has been equipped accordingly. The locomotives can be operated with 14, 28 and 128 speed steps; on the one hand, this can be defined in principle, but on the other hand, it can be changed for each locomotive as required.

Via 2 different programming modes you can set your locomotive decoders according to your own ideas: The most important CV values one to five can be reached directly via the key combination "Menu" and 1-5, the 1024 CVs possible here can be reached via the programming menu. Of course - depending on the decoder design - all values up to 255 can be programmed. Reading of CV 1-1024 is possible in connection with a readout capable amplifier (z21/Z21).

Switch mode: The Z21 multiMAUS can switch up to 1024 solenoid items! These elements must have an electric drive for this and must be connected to a solenoid decoder. The programming of the magnetic article decoders is then done electronically via the tracks.

Features:

• Manufacturer: Roco
• Gauge size: All
• Firmware updateable
• Display brightness adjustable
• compatible to the old Lokmaus 2 system
• up to 9,999 locomotive addresses can be controlled by direct input, 64 of them can be stored in a database and given names: e.g. 103RB (103 red-beige)
• 29 functions (incl. front lighting) can be activated per locomotive, if machine is equipped accordingly
• locomotives can be operated with 14, 28 and 128 speed steps
• via 2 different programming modes you can set your locomotive decoders according to your own ideas
• the most important CV values one to five can be reached directly via the key combination "Menu" and 1-5, the 1024 CVs possible here can be reached via the programming menu
• depending on the decoder configuration all values up to 255 are programmable
• readout of CV 1-1024 possible in connection with readout capable amplifier (z21/Z21)

switch mode:

• up to 1024 solenoid elements switchable (these elements must have an electric drive for this and must be connected to a solenoid decoder)
• Programming of the magnetic article decoders is then done electronically via the tracks

Scope of delivery:

• Z21 multiMAUS
• Connection cable
• Operating instructions

Specs:

• Type: Drive controller

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.