Seuthe-Nr E 12 Ersatz Steck-steam generator 16 -22V

The installation of the steam generator requires a 7 mm hole to be drilled in the housing in place of the original chimney. In order to obtain a precise hole, it is advantageous to pre-drill with 3 or 4 mm. Glue the heat insulation ring into the hole using a fast-setting adhesive. Before the glued joint is hard and the insulating ring can no longer be moved, it is aligned vertically with the steam generator inserted. Before final installation, the steam generator is pushed into the conical sleeve, which serves as the new chimney. Remove any burrs from the insulating ring and cone sleeve so that the steam generator can be pushed in easily. One connecting wire is connected to earth, the other to a live point.

Features:

• Seuthe - No. E 12 replacement plug-in steam generator 16-22V
• For retrofitting
• Plug-in generator for Märklin digital
• Direct or alternating voltage

Specs:

• Gauge: H0
• Type: Replacement Part

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.