Tillig 08415 Schaltrelais /Zeitschalter

Switching relay/timer replaces the mechanical modules relay and timer, part no.: 08410 and 08420, with a modern electronic solution. The special feature is that the relay and timer function are integrated in one module and are plugged in by the user via a "jumper". In contrast to the predecessor modules, a separate power supply is required here, which can be taken from any accessory transformer (12 ... 16 V). The module has two potential-free change-over contacts with a maximum current carrying capacity of 1 A each. The control inputs "E" and "A" are short-circuit protected, so that almost every control signal in the range of -16 V to approx. +0.5 V leads to switching. They can also be interconnected between several relay modules. On the module there is a setting potentiometer, which is used to set the switching delay (approx. 2 s to approx. 5 min) An LED signals the switching state "relay off". After providing the supply voltage, the module automatically goes into this preferred position (LED on).

Features:

• Tillig - Switching relay/zee switch
• Nominal size H0, scale 1:87, track gauge 16.5mm
• Nominal size H0m, scale 1:87, track gauge 12mm
• Nominal size H0m, scale 1:87, track gauge 12mm
• Nominal size H0e, scale 1:87, gauge 9mm
• Nominal size H0e, scale 1:87, gauge 9mm
• Nominal size TT, scale 1:120, gauge 12mm
• Nominal size TT, scale 1:120, track width 12mm
• Not suitable for children under 14 years
• Product weight: 75g incl. sales packaging

Instruction manual / Safety instructions:

• Manual (536.41 KB)

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.