ESU 51840 SignalPilot, Signaldecoder with 16 unabhängigen Funktionsausgängen

The SignalPilot is a multi-protocol accessory decoder designed for switching signals. Due to its intelligent software it can be used under DCC or Motorola®. The flexible programming makes this decoder the all-rounder among our accessory decoders. The SignalPilot has 16 outputs to which the individual micro lamps or LEDs of light signals can be connected directly. Because the outputs are designed as push/pull stages, both conventional light signals with common anode and light signals or light strips with common ground connection (common cathode), as can be found with Viessmann® signals, are suitable. But also motorized shaped signals and turnout drives can be operated directly with the SignalPilot.

Features:

• Suitable for all track sizes

Operating modes:

• NRMA/DCC "Accessory Decoder" compatible
• K83 compatible
• Motorola® with up to 127 addresses
• Power supply by digital command station or separate DC or AC transformer up to 18V AC

Outputs:

• 16 outputs, each loadable with 250mA
• Connection with removable terminal blocks
• Push/pull stage design: outputs can be individually switched to decoder ground or positive voltage
• Individual assignment of decoder addresses to the outputs (mapping)
• Light effects, brightness individually adjustable
• fading effects and time control
• built-in signal patterns
• outputs protected against short circuit and overload

Specs:

• Gauge: All
• Type: 1

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.