ESU 59610 LokPilot V5.0, Multiprotokoll DCC/MM/SX 8-pin

The LokPilot 5 is a true multi-protocol decoder. It masters the DCC data format as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2- and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders register fully automatically with a suitable digital command station.It masters all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable command stations. For command stations that can only program the CVs from 1-255 there are auxiliary registers.Motorola® users benefit from up to 28 speed steps at 255 addresses. Three additional Motorola® addresses allow the triggering of 16 functions. A built-in programming mode makes reprogramming possible even with the venerable Control Unit 6021.The M4 protocol allows automatic registration with mfx® compatible command stations. All 32 possible function keys are offered here.

The LokPilot 5 decoder recognizes Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC shuttle train automatic allows automatic shuttling between two stations.The LokPilot 5 decoder can be used on analog DC and AC railroads.The decoder switches between the operating modes fully automatically on-the-fly. For the most part, nothing needs to be set.

Features:

• Packed with function outputs
• Depending on interface version: 10 amplified function outputs with 250mA output current each
• Versions with PluX22 or 21MTC interface: 4 outputs for controlling servos or logic level outputs
• All important light functions available
• Brightness of each output can be adjusted separately
• Decoder masters automatic pressing on and off during uncoupling for ROCO®, Krois® and Telex® couplers
• Motor control has been improved again
• variably adjustable PWM clock frequency (10kHz to 50kHz) ensures super-quiet operation, especially with bell-shaped armature motors
• no hum
• load control can be adapted to difficult cases with up to 10 CVs
• Autotune function allows automatic tuning of the decoder to the motor
• delivers with up to 1.5A motor current enough juice even for older motors
• if desired a PowerPack can be connected to bridge dirty track sections
• all function outputs as well as the motor output are protected against overloading

Specs:

• Gauge: H0
• Type: 1

Instruction manual / Safety instructions:

• Manual (2.18 MB)

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.