ESU 59620 LokPilot 5 DCC, 8-pin NEM 652

The LokPilot 5 DCC is a "purebred" DCC decoder. 14 to 128 speed steps are as natural as 2 and 4 digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoder logs on to a suitable digital command station fully automatically.

It handles all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable command stations. For command stations that can only program CVs from 1-255 there are auxiliary registers.

The LokPilot 5 DCC decoder recognizes Märklin® braking tracks as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC shuttle train automatic allows automatic shuttling between two stations.

The LokPilot 5 DCC decoder can be used on analog DC railroads. The maximum speed can be set separately.

The decoder switches between the operating modes fully automatically "on-the-fly". For the most part, nothing needs to be set.

Features:

• 10 amplified function outputs with 250mA output current each
• brightness of each output can be adjusted separately
• masters automatic pressing on and off during uncoupling for ROCO®, Krois® and Telex® couplers
• variably adjustable PWM clock frequency from 10kHz to 50kHz
• all function outputs as well as the motor output are protected against overloading

Specs:

• Gauge: H0
• Type: 1

Instruction manual / Safety instructions:

• Manual (2.18 MB)

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.