ESU 59219 LokPilot 5 Fx DCC/MM/SX, 21MTC NEM660, Retail

The LokPilot 5 Fx is a function decoder without motor output and thus perfectly suited for installation in control cars or function models. Because it speaks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital command stations. Its flexible function key assignment and the manifold light effects it shares with the other LokPilot 5 decoders from ESU.

Functions

The LokPilot 5 Fx has been equipped with an astonishing number of function outputs. Depending on the interface version, each LokPilot 5 Fx decoder offers at least 10 amplified function outputs with 250mA output current each. The versions with PluX22 or 21MTC interface add 4 outputs for controlling servos or logic level outputs. All important light functions are available. The brightness of each output can be adjusted separately.

Interaction

The LokPilot 5 Fx is designed to interact with the LokSound 5 and the LokPilot 5 decoders: For example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 decoder and the cab car with a LokPilot 5 Fx. Assuming the same address, both behave absolutely identically. The identical arrangement of the CVs facilitates the tuning of the two decoders.

Operational safety

If desired, a PowerPack can be connected to the LokPilot 5 Fx for bridging dirty rail sections.

Protection

Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.

Features:

• ESU - LokPilot 5 Fx DCC/MM/SX
• 21MTC NEM660
• Track gauge H0, 0

Operating modes:

• NMRA/DCC with 14, 28 and 128 speed steps, DCC RailCom®
• DCC 2-digit and 4-digit addresses (short and long addresses)
• Digital Motorola® (old and new), up to 255 addresses in Motorola® mode
• Selectrix® operation
• Analog DC voltage (can be switched off). Analog AC voltage (can be switched off)
• Automatic detection of operating mode and DCC speed step setting
• Support of Lenz® LG100, Märklin®, Roco® brake sections and ZIMO® HLU commands
• Support for ABC brake mode and ABC shuttle train route
• Wrong drive bit / storage of operating states
• Intelligent programming mode with Märklin® 6021®
• Shunting mode and acceleration and braking delay switchable by button

Function outputs:

• 10 amplified function outputs
• Version with 21MTC interface additionally 2 logic level outputs as well as 2 further logic level outputs instead of SUSI
• Version with PluX22 interface 2 logic level outputs instead of SUSI
• 250mA load capacity per amplified output
• Total current of all function outputs approx. 1500mA. Outputs short circuit proof
• Assignment of the function outputs freely selectable (function mapping).

Dimensions:

• 16.5mm x 15.5mm x 4.5mm

Specs:

• Gauge: H0
• Type: Accessories

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.