NEW ROBO 010003DE TT Diesellok SU 42 509, Polregio, Ep. VI, DC-Sound

Robo 010003DE TT Diesel Locomotive SU 42 509, Polregio, Era VI, DC Sound

Are you looking for a digitally equipped TT-scale diesel locomotive with sound that represents a modern Polish prototype from Era VI? The Robo 010003DE TT Diesel Locomotive SU 42 509, Polregio, Era VI, DC Sound brings the SU42-509 to your layout as a 1:120 scale model and offers extensive digital features with an ESU sound decoder.

The prototype is assigned to the Pomeranian Division in Gdynia and bears the locomotive number SU42 509. With its POLREGIO livery, this diesel locomotive fits perfectly into modern TT scenes and enhances both collections and operational layouts with a distinctive vehicle.

Digital SU42 Diesel Locomotive for TT Gauge

The digital version is equipped with an ESU sound decoder and features an SU42 model with an E24 interface. This 24-pin decoder interface supports the SUSI protocol and opens up a wide range of possibilities for lighting and sound functions.

The circuit board allows for any combination of the lights used by PKP, as each LED is controlled by a separate output from the decoder. Additionally, the cab lighting ensures an authentic look during layout operation.

Extensive Sound and Light Functions

The ESU LokSound 5 decoder offers a wide range of operating, sound, and lighting functions. From running sounds and horn signals to special light signals and braking functions, this creates a versatile model for digital TT operation.

Get the Robo 010003DE TT Diesel Locomotive SU 42 509, Polregio, Ep. VI, DC sound, and expand your TT collection with a modern diesel locomotive featuring extensive decoder capabilities, sound, and prototypical lettering.

Features:

• Item Number: 010003DE
• Gauge: TT
• Scale: 1:120
• Era: VI
• Railroad Company: POLREGIO
• Diesel locomotive
• Type: SU42
• Locomotive number: SU42 509
• SU42-509 diesel locomotive — Pomeranian Division in Gdynia
• Digital version with ESU sound decoder
• DC sound
• SU42 model with E24 interface
• 24-pin decoder with SUSI protocol support
• Crew compartment lighting
• Circuit board allows for any combination of the lights used by PKP
• Each LED has a separate output from the decoder
• Assignment: Pomeranian Division in Gdynia
• Revision date: March 7, 2018
• Model year: 2026

Functions of the ESU LokSound 5 decoder:

• Decoder automatically programmed to address CV1 = 3
• F0 – Turn the white headlights on/off (signal Pc1); they change direction-dependently
• F1 – Turn the red tail lights on/off (Signal Pc5); they alternate depending on the direction of travel
• F2 – Horn (high-pitched tone)
• F3 – Horn (low pitch)
• F4 – Headlights: short/long beam
• F5 – Operating a heavy train set; engine speed one notch higher than normal
• F6 – Shunting at reduced speed, with reduced acceleration and braking times, and a white shunting light on the right side of the locomotive*
• F7 – Cab lighting
• F8 – Turn sound on/off
• F9 – Turn lights on/off for running against the default direction (Signal Pc2)
• F10 – Turn lights on/off for train stop on open track for unknown reason (signal Pc6)
• F11 – Compressed air discharge
• F12 – Idle
• F13 – Apply/release locomotive brakes
• F14 – Station announcement #1
• F15 – Conductor’s whistle
• F16 – Fan
• F17 – Automatic train braking
• F18 – Station announcement #2
• F19 – Apply/release handbrake
• F20 – Squealing in Curves
• F21 – Passing through switches
• F22 – Rail joint noise
• F23 – Applying/releasing the train brake
• F24 – Compressor
• F25 – Sand spreader
• F26 – Coupler
• F27 – Open/close driver's cab door
• F28 – Activate manual power level mode
• F29 – Increase power mode
• F30 – Decrease power mode

Notes on decoder functions:

• On the SM42/SU42/SP42 model, the shunting lights are only turned on on one side and do not alternate depending on the direction of travel, as they do on the actual locomotive of this type.
• Various engine start modes can be selected: Press F8 once – warm start; press F8 twice – faulty start; press F8 three times – cold start.
• F28 activates manual power level adjustment. When F29 is activated, F29 can be used to increase the power level and F30 to decrease it. To return to normal mode, F28, F29, and F30 must be turned off. If F28 is off and F29 is pressed, the diesel engine will run at full speed.

Specs:

• Gauge: TT
• Rail Company: Misc.
• Era: VI
• Color: Multi-Colored
• Electricity System: DC
• Analogue / Digital: Digital
• sound: Yes
• News: 2026
• Type: Diesel loco

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.