ESU 59649 LokPilot 5 DCC/MM/SX/M4, 21MTC MKL

The LokPilot 5 is the most important member of the LokPilot family and is suitable for almost all applications in H0 and 0 gauge locomotives. LokPilot 5 decoders are available with all common interfaces.

Features:

• ESU - LokPilot 5 DCC/MM/SX/M4
• NMRA/DCC with 14, 28 and 128 speed steps, DCC RailCom®
• DCC 2-digit and 4-digit addresses (short and long addresses)
• Digital Motorola® (old and new), up to 255 addresses in Motorola® operation
• Selectrix® operation
• M4 operation (automatic log-on to mfx®-compatible command stations)
• Analog DC voltage (can be switched off). Analog AC voltage (can be switched off)
• Automatic detection of the operating mode and DCC speed level setting
• Support for Lenz® LG100, Märklin®, Roco® braking sections and ZIMO® HLU commands
• Support for ABC braking mode and ABC shuttle train route
• False travel bit / storage of operating states
• Intelligent programming mode with Märklin® 6021®
• Shunting gear and acceleration and braking delay switchable by button
• 2.0 A continuous load capacity
• Connection of DC bell-type armature and AC motors (with permanent magnet)
• Silent, motor-friendly control with up to 50 kHz clock frequency
• Motor output protected against overload. 5th generation load control (can be switched off)
• 10 amplified function outputs
• Version with 21MTC interface additionally 2 logic level outputs and 2 further logic level outputs instead of SUSI
• Version with PluX22 interface 2 logic level outputs instead of SUSI
• 250mA load capacity per amplified output
• Total current of all function outputs approx. 500mA. Outputs short-circuit proof
• Assignment of the function outputs freely selectable (function mapping)
• Dimensions: 21.4mm x 15.5mm x 4.5mm

Specs:

• Gauge: H0
• Type: Decoder

Further links:

• Print View

CAUTION: Not suitable for children under 3 years. Danger of swallowing! Age recommendation from 14 years.